• If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • Whenever you search in PBworks, Dokkio Sidebar (from the makers of PBworks) will run the same search in your Drive, Dropbox, OneDrive, Gmail, and Slack. Now you can find what you're looking for wherever it lives. Try Dokkio Sidebar for free.


Ubuntu on the Dell XPS M1530

Page history last edited by PBworks 14 years, 5 months ago

Ubuntu on the Dell XPS M1530


I have a Dell XPS M1530 with the following specifications:


  • Processor: Intel Core 2 Duo T9300 (2.5 GHz, 6 MB L2 cache)
  • Graphics: nVidia GeForce Go 8600M GT with 256 MB video memory
  • Screen: 15.4-inch widescreen, 1680 x 1050 CCFL (LG) with 2.0 Mpixel webcam
  • RAM: 4 GB (2 x 2GB) 667 MHz DDR2
  • Harddisk: 320 GB SATA 5400 RPM (Samsung)
  • Wireless: Intel 4965 AGN WiFi
  • Bluetooth: Dell TrueMobile 355
  • Fingerprint reader
  • DVD+/-RW slot-load drive
  • 90W AC adapter, standard 6-cell battery


It came with Windows Vista Ultimate, but I will mainly be running Ubuntu on it.

On this page I keep track of what I need to do to get 64-bit Ubuntu 8.04 running on it.


So far it works great, better than any other Ubuntu release I've tried before. There are some things I had to configure, as described below, but no serious problems or things that require a major effort to get working.




Some months ago, there was a problem that caused some consternation. It seems that under Ubuntu, many people hear their laptop harddisk click every few seconds. See this ubuntuforums.org thread for more information.


I noticed that the harddisk of my M1530 clicks too. I installed the package smartmontools and used "sudo smartctl -a /dev/sda" to see if the Load_Cycle_Count of my disk is increasing. smartctl does not show a variable named Load_Cycle_Count, but it does show Start_Stop_Count which seems to be similar / the same. It was indeed increasing after every click from the harddisk (every few seconds).


I tried using "sudo hdparm -B 255 /dev/sda" to switch off power management, but it looks like that does not work on this harddisk (it does nothing and the clicking continues). Fortunately, "sudo hdparm -B 254 /dev/sda" does work and stops the clicking. I use the ugly fix to fix the problem for now.




My XPS M1530 came with BIOS version A07, but the latest available BIOS version is A08, so I updated it.

The touchpad does not work properly with BIOS version A08. This problem is solved by using the following kernel boot parameter:




Found in this ubuntuforums thread.


Adding the kernel boot parameter can be done at boot time, by pressing 'e' in GRUB to add the parameter to the command line. To make it permanent, I added the parameter to the Linux kernels listed in /boot/grub/menu.lst.


Note: Scrolling with the touchpad does not work (using the right and bottom edges of the touchpad to scroll). Another user reported that it randomly works and doesn't work.




Immediately after installing I went to System / Administration / Hardware Drivers. There was something strange here: The nVidia driver was enabled, but not in use. Disabling / enabling the driver didn't work. To make it work properly, I had to refresh the package management system:


sudo apt-get update


After that, the driver was disabled in the Hardware Drivers screen. When I enabled it, it downloaded and installed the driver.




Works out-of-the-box, tested with Cheese and Skype.


Wireless networking


Works out-of-the-box. Click the networking icon in the top right of the screen, select my WiFi network and enter the network password. I'm using WPA2 encryption.


Bluetooth mouse


Getting my Logitech V470 bluetooth mouse to work was not difficult:


  1. Right-click the Bluetooth icon in the top right of the screen and select Preferences.
  2. Make sure "Other devices can connect" is selected.
  3. Go to Services, Make sure "Input service" is running.
  4. Switch on the mouse and click the Connect button on the bottom of the mouse.
  5. Click the "Add" button at the bottom. The mouse should appear (after a while) in the window.




Works out-of-the-box. PulseAudio, which is new in this version of Ubuntu, works great. I installed padevchooser, the PulseAudio device chooser. One of the features of PulseAudio is that you can control the volume of different applications independently, which is really nice. Some people seem to have some trouble with PulseAudio and certain applications, such as Skype. I have Skype on my laptop but did not notice any problems yet. Useful information in this forum thread.




The microphone works, but it has to be configured:


  1. Double-click the volume control icon in the top right of the screen.
  2. Select Edit / Preferences.
  3. Add "Digital" and "Digital Input Source" to the list of visible tracks.
  4. On the Options tab, select "Digital Mic 1" for "Digital Input Source".
  5. On the Recording tab, set the input volume of the microphone.


Fingerprint reader


Install thinkfinger-tools and libpam-thinkfinger:


sudo apt-get install thinkfinger-tools libpam-thinkfinger


Test it and edit /etc/pam.d/common-auth as described in the Ubuntu wiki and reboot.


Unfortunately I have some problems after logging in by swiping my finger. It looks like not all software understands that I've logged in and asks for me to type in my password - which ofcourse defeats the purpose of the fingerprint reader... See bug #221900.


Remote control


TODO: Not yet tested. It should just work, see this.




TODO: Test video and sound, but I don't have a screen with HDMI input.


Suspend and hibernate 


Suspend and hibernate work without any problems.


I do get a white screen with only the mouse cursor sometimes after resuming. If I type in my password and press Enter, my desktop returns normally.


Temperature sensors


Install sensors-applet, lm-sensors and hddtemp:


sudo apt-get install sensors-applet lm-sensors hddtemp


Reboot (to load hddtemp automatically). Then right-click the top GNOME panel, click "Add to Panel..." and add the Hardware Sensors Monitor applet. It displays the CPU, GPU and harddisk temperatures. I also added the CPU Frequency applet.


Comments (0)

You don't have permission to comment on this page.